Efficient removal of Cr(VI) by a 3D Z-scheme TiO2-ZnxCd1-xS graphene aerogel via synergy of adsorption and photocatalysis under visible light

Efficient and robust photocatalysts for environmental pollutants removal with outstanding stability have great significance. Herein, we report a kind of three dimensional (3D) photocatalyst presented as Z-scheme heterojunction, which combining TiO 2 and Zn x Cd 1- x S with graphene aerogel to contrast TiO 2 -Zn x Cd 1- x S graphene aerogel (TSGA, x = 0.5) through a moderate hydrothermal process. The as-prepared Z-scheme TSGA was used to remove aqueous Cr(VI) via a synergistic effect of adsorption and visible light photocatalysis. The adsorption equilibrium can be reached about 40 min, then after about 30 min irradiation under visible light (wavelength ( λ) > 420 nm) the removal rate of Cr(VI) almost reached 100%, which is much better than the performance of pristine TiO 2 and Zn 0.5 Cd 0.5 S, as well as TiO 2 graphene aerogel (TGA) and Zn 0.5 Cd 0.5 S graphene aerogel (SGA). The virulent Cr(VI) was reduced to Cr(III) with hypotoxicity after photocatalysis on TSGA, meanwhile the as-synthesized TSGA presented a good stability and reusability. The reduced graphene oxide (rGO) sheets between TiO 2 and Zn 0.5 Cd 0.5 S played a role as charge transfer mediator, promoting the photoinduced electrons transfer and photocatalysis ability of TSGA was enhanced significantly. Hence,such photocatalyst exhibits a potential application on removing heavy metals with high efficiency and stability from polluted aqueous environment.     

Systematic review of conservation interventions to promote voluntary behavior change

Understanding human behavior is vital to developing interventions that effectively lead to proenvironmental behavior change, whether the focus is at the individual or societal level. However, interventions in many fields have historically lacked robust forms of evaluation, which makes it hard to be confident that these conservation interventions have successfully helped protect the environment. We conducted a systematic review to assess how effective nonpecuniary and nonregulatory interventions have been in changing environmental behavior. We applied the Office of Health Assessment and Translation systematic review methodology. We started with more than 300,000 papers and reports returned by our search terms and after critical appraisal of quality identified 128 individual studies that merited inclusion in the review. We classified interventions by thematic area, type of intervention, the number of times audiences were exposed to interventions, and the length of time interventions ran. Most studies reported a positive effect (n = 96). The next most common outcome was no effect (n = 28). Few studies reported negative (n = 1) or mixed (n = 3) effects. Education, prompts, and feedback interventions resulted in positive behavior change. Combining multiple interventions was the most effective. Neither exposure duration nor frequency affected the likelihood of desired behavioral change. Comparatively few studies tested the effects of voluntary interventions on non-Western populations (n = 17) or measured actual ecological outcome behavior (n = 1). Similarly, few studies examined conservation devices (e.g., energy-efficient stoves) (n = 9) and demonstrations (e.g., modeling the desired behavior) (n = 5). There is a clear need to both improve the quality of the impact evaluation conducted and the reporting standards for intervention results.     

Are older drivers’ driving patterns during an on-road driving task representative of their real-world driving patterns?

Abstract

Objective: The current study investigated whether older drivers’ driving patterns during a customized on-road driving task were representative of their real-world driving patterns.

Methods: Two hundred and eight participants (male: 68.80%; mean age?=?81.52 years, SD?=?3.37 years, range?=?76.00–96.00 years) completed a customized on-road driving task that commenced from their home and was conducted in their own vehicle. Participants’ real-world driving patterns for the preceding 4-month period were also collected via an in-car recording device (ICRD) that was installed in each participant’s vehicle.

Results: During the 4-month period prior to completing the on-road driving task, participants’ median real-world driving trip distance was 2.66?km (interquartile range [IQR]?=?1.14–5.79?km) and their median on-road driving task trip distance was 4.41?km (IQR?=?2.83–6.35?km). Most participants’ on-road driving task trip distances were classified as representative of their real-world driving trip distances (95.2%, n?=?198).

Conclusions: These findings suggest that most older drivers were able to devise a driving route that was representative of their real-world driving trip distance. Future research will examine whether additional aspects of the on-road driving task (e.g., average speed, proportion of trips in different speed zones) are representative of participants’ real-world driving patterns.     

From conference abstract to publication in the conservation science literature

Every 2 years, the conservation community comes together at The Society for Conservation Biology's International Congress for Conservation Biology (ICCB) to share new developments in conservation science and practice. Publication of findings presented at conferences in scientific journals adds to the permanent record and helps increase the potential impact of the work presented. However, quantitative research on publication rates for meetings relevant to conservation is lacking. For the 25th ICCB, (Auckland, New Zealand in 2011), we examined study publication rates and presenter demographics, recorded titles, number of authors, presenter affiliations, gender, country of the study region, publication status, and elapsed time between presentation and publication. Of the 980 contributions (782 talks and 198 posters), 587 (60%) were published as peer-reviewed journal articles or book chapters. Mean time to publication was 13.7 months for all presentation abstracts and 21.3 months excluding abstracts with corresponding articles that were published before the meeting. The gender breakdown of presenters was almost even (53% male, 47% female), but representation of the countries where the presenting authors were based was skewed. The political units with the most contributions were by far the United States, Australia, New Zealand, and the United Kingdom. Presenters based in 16 different English-speaking countries made up 74% of the total sample, but this did not influence the likelihood of their abstract leading to a publication. Examination of conference presenters and publication of their presentations is useful to identify biases and potential challenges that need to be addressed to make conference communications permanent and increase their reach beyond conference attendees.     

天水市紫外吸收性气溶胶时空动态的遥感监测

采用OMI传感器的气溶胶产品,分析了2006—2015年中国西部城市天水市对流层紫外吸收性气溶胶的时空分布特征。结果表明:空间上,十年间天水市的吸收性气溶胶表现出从中部向周围依次减弱的南北向带状分布规律;季节变化呈现出秋冬季高于春夏季的规律;时间上,吸收性气溶胶指数(AI)从2006年的0.075增至2015年的0.506,年均值为0.28,年均增长率为57.5%;十年间出现2次阶段性增长和2次阶段性减小;AI年际变化与天水市地方总产值相关性为0.902,第一产业对其影响最大,第三产业影响最小。     

沼泽湿地水生无脊椎动物完整性指数构建与健康评价

依据2017年5、7、9月对三江平原19处沼泽湿地(参照湿地6处,受损湿地13处)的水生无脊椎动物采样结果,应用生物完整性理论和方法,构建水生无脊椎动物完整性指数,评价三江平原沼泽湿地健康状况。通过对27个候选指标的分布范围、判别能力和相关性分析,筛选出总分类单元数、扁卷螺科百分比、龙虱科百分比、刮食者百分比4个指标构成水生无脊椎动物完整性指数核心指标。采用比值法计算各指标参数值,将各参数值加和得到水生无脊椎动物完整性指数值。根据参照湿地水生无脊椎动物完整性指数值的25%分位数值确定评价标准,对小于25%分位数的值进行三等分,确定三江平原沼泽湿地健康评价标准:≥2.58,无干扰;1.72～2.58,轻度干扰;0.86～1.72,中度干扰;0～0.86,重度干扰。结果表明:所调查的三江平原沼泽湿地有78.95%受到不同程度的干扰(其中47.37%受到了中重度干扰),21.05%属于无干扰。     

生理因素对驾驶人行为及风险感知影响研究综述

为全面认识驾驶人行为及风险感知并分析行为成因，从驾驶人生理因素着手，从驾驶人视力、阻塞性睡眠呼吸暂停综合征和肌肉骨骼疾患3个方面梳理国内外驾驶人行为及风险感知的研究成果与研究不足。研究结果表明:驾驶人的生理疾病对其驾驶能力和危险感知存在显著影响;生理疾病严重程度与异常驾驶行为中的一般性失误、危险性失误行为之间具有显著正相关关系，疾病严重程度越高，出行失误行为的频率越高；之后可从理论和实验两方面着手，针对驾驶人的不同属性进行研究。     

Understanding implications of consumer behavior for wildlife farming and sustainable wildlife trade

Unsustainable wildlife trade affects biodiversity and the livelihoods of communities dependent upon those resources. Wildlife farming has been proposed to promote sustainable trade, but characterizing markets and understanding consumer behavior remain neglected but essential steps in the design and evaluation of such operations. We used sea turtle trade in the Cayman Islands, where turtles have been farm raised for human consumption for almost 50 years, as a case study to explore consumer preferences toward wild‐sourced (illegal) and farmed (legal) products and potential conservation implications. Combining methods innovatively (including indirect questioning and choice experiments), we conducted a nationwide trade assessment through in‐person interviews from September to December 2014. Households were randomly selected using disproportionate stratified sampling, and responses were weighted based on district population size. We approached 597 individuals, of which 37 (6.2%) refused to participate. Although 30% of households had consumed turtle in the previous 12 months, the purchase and consumption of wild products was rare (e.g., 64–742 resident households consumed wild turtle meat [i.e., 0.3–3.5% of households] but represented a large threat to wild turtles in the area due to their reduced populations). Differences among groups of consumers were marked, as identified through choice experiments, and price and source of product played important roles in their decisions. Despite the long‐term practice of farming turtles, 13.5% of consumers showed a strong preference for wild products, which demonstrates the limitations of wildlife farming as a single tool for sustainable wildlife trade. By using a combination of indirect questioning, choice experiments, and sales data to investigate demand for wildlife products, we obtained insights about consumer behavior that can be used to develop conservation‐demand‐focused initiatives. Lack of data from long‐term social–ecological assessments hinders the evaluation of and learning from wildlife farming. This information is key to understanding under which conditions different interventions (e.g., bans, wildlife farming, social marketing) are likely to succeed.     

A multi-objective design optimisation of eco-friendly aircraft: the impact of noise fees on airplanes sustainable development

The current work deals with multi-objective optimisations including financial merit factors in the multi-disciplinary conceptual design of a commercial aircraft with a specific focus on noise social cost. The results of optimisations using financial and performance-oriented objective functions have been analysed and combined in a multi-objective optimisation problem using a three-dimensional objective vector. The main novelty of the present work is the analysis of social cost noise fees effectiveness integrated in financial models embracing a wider group of stakeholders’ interests. The foundations of this research lie on the air traffic increase envisaged in the next decades and the contextual growth of the urban areas nearby airport facilities. This scenario requires the aeronautical industry to handle the environment challenge taking into account all the social and economic effects. Indeed, the consolidated technology has approached a saturation point, therefore breakthrough concepts and configurations are mandatory. This matter is addressed as a highly multi-disciplinary problem within conceptual design framework. The financial model proposed is shown to highlight the need of appropriate noise fees as instruments to push all stakeholders towards a technology radical renewal and encourage the aeronautical industry towards a shared strategy in the development of an eco-friendly commercial aviation system.     

Effects of EGR on performance and emissions of a diesel engine fuelled with balanites aegyptiaca/diesel blends

In this study, balanites Aegyptiaca (L.) Del biodiesel was blended in proportions of 10% and 20% on the volume basis with diesel fuel and tested in a single cylinder, VCR diesel engine under measured load conditions with varied EGR rates (0, 10 and 20%). The results showed that B10 and B20 blends shown a significant reduction rate in terms of NO_x emissions that were familiar with biodiesel blends. At peak load conditions, BTE increased slightly for test fuel blends compared with pure diesel fuel while the BSFC rate and EGT suffered from increasing and decreasing nature with respect to blending percentage. From the emissions point of view, with the increase in blends percentage, a significant reduction rate is observed in terms of CO and HC concentrations (up to 12.34 and 17.5%, respectively) while NOx emissions decreased at peak load conditions (up to 24.34%). HC and CO emissions decreased with increase in blends percentage. However, lower levels of NO_x and EGT (up to 21.37 and 8.47%, respectively) and the average increase in terms of BTE and BSFC (up to 2.83 and 2.9%, respectively) can be realised with B20 test fuel blend under 20% EGR rate.